Season 2 episodes 30 on

OK, so we decided to split the season in two. We're men, we can do that. If you want to go back and see other, older episodes, go here for the first half of season 2 or here for all of season one.

Week Thirty

The first in our multi-part series on buildng a Ford 9-inch rear axle with parts from Summit Racing.

Week Thirty one

The second in our multi-part series on buildng a Ford 9-inch rear axle with parts from Summit Racing.

Week thirty two

The third in our multi-part series on buildng a Ford 9-inch rear axle with parts from Summit Racing.

Week thirty three

The forth in our multi-part series on buildng a Ford 9-inch rear axle with parts from Summit Racing.

Week thirty four

Part 1 of our distributor install using Pertronix, and Royal Purple.

Week thirty five

We finish up the installation of the Pertronix with why you need a vacuum advance on your street car and by hiding the wiring.

Week thirty six

If you are trading out the glass you will need to remove the old glass from the retainer channel and the stainless as well.

Week thirty seven

In this episode we tackle putting the new NPD glass into our Dynacorn channels and stainless for a sweet fit and a new look!

Week thirty eight

We install JBA's headers in our 1967 Mustang Fastback using Stage 8 fasteners & Real Seal header gaskets from Summit Racing.

Week thirty nine

We prepare to install a high performance mechanical fuel pump from Summit Racing into our 1967 Mustang Fastback

Week Forty

We install a high performance  mechanical fuel pump from Summit Racing into our 1967 Mustang Fastback and talk NPD lines

Week Forty One

we embark on the installation of a quarterpanel skin on a '69 Camaro. We use parts from NPD and help from Mustang Central.

Week Forty Two

We go back to Mustang Central to complete the wheel house on our way to the installation of a quarterpanel skin on a '69 Camaro.

Week Forty Three

We complete the quarter skin on a '69 Camaro. This episode at Mustang Central will focus on installing the skin 

Week Forty Four

We we take on SEMA, talk about a cure, and chat with Dynacorn about what is new for them this year. We also theoreticly build a '67 convertible Mustang. 

Week Forty Five

This episode we install a PA Performance 95 Amp Alternator and show how to modify the "expendable" alternator harness to accept the new style of alternator

Week Forty Six

This episode we install a PA Performance PMGR high torque mini starter and talk batteries and wiring from National Parts Depot.

Week Forty Seven

This episode we talk about electrical grounds, neat wiring, and making the serpentine belt system fit better into a 1967-70 Mustang.

Week Forty Eight

This episode we about the best way to install your bumper for better fit and cleaner looks on a 1967-68 Mustang; though most of the tips will apply to most vintage cars.

Week Forty Nine

This episode we finalize the front valance and grille on a 1967-68 Mustang;we use products from Eastwood and NPD.