How To Prepare For 4r70w Transmission Installation On Classic FordWe are pulling out the Ford C4 Transmission from the 1969 Fairlane station wagon and putting in a 4R70W. There is very little information on how to put an Automatic Overdrive in the Ford Fairlane Torino Mercury Montego Comet so we sift through the issues and show what you need to know to put an 4R70W from Monster Transmissions www.monstertransmission.com into a Classic Ford Torino Fairlane Montego Comet. This week we are taking the time to investigate what will go into the install of the AOD.
Patreon: https://www.patreon.com/gasolinemedia www.monstertransmission.com Jeff Ford Contact: [email protected] Vertical Divider
|
Building a Custom Cross Member For Ford We build a custom crossmember to fit our 4R70W. Most Falcon Fairlane Torino and Comet Montego built between 1966 and 1971 were equipped with the C4 automatic. The AOD and 4R70W would probably use a C6 Four Speed cross member. While maybe more appropriate, we use the C4 transmission mount to achieve the same result without spending all the money on a good used C6 automatic cross member.
Patreon: https://www.patreon.com/gasolinemedia www.monstertransmission.com |
US Shift Quick 4 Controller on a 4R70WThis week we look over the excellent shift controller from US Shift. We look at the Quick 2 the Quick 4 and even the Quick 6. We also show an alternative mounting position to the typical glove box mount. We show how to de-pin the wiring to make passing it through the hole in the floor easier.
Parts: www.monstertransmission.com www.usshift.com Vertical Divider
|
How To Wire a 4R70W US Shift ControllerWe cover the best way to wire a US Shift 4R70W controller. We choose to wire it under the seat due to a lack of space in the dash. We show how we have wired the AOD OFF light and where to mount the AOD OFF switches on the dash. We also discuss why we use crimp connectors as opposed to soldering all of our connections. We show how to pin out a Deutsch connector.
Patreon: https://www.patreon.com/gasolinemedia www.monstertransmission.com www.usshift.com Jeff Ford Contact: [email protected] |
Holley TPS KitWe cover the complete install of a Holley Throttle Position Sensor Part Number 534-202. We show how to assemble the Holley Electric Choke TPS. We cover tips and tricks for making the assembly go smoothly. Need to see how to wire it go here: https://youtu.be/SF1KOhB82yE
Patreon: https://www.patreon.com/gasolinemedia www.monstertransmission.com www.usshift.com Jeff Ford Contact: [email protected] Parts: Holley Throttle Position Sensor with Electric Choke: 534-202 |
Measuring for a New Driveshaft With the update to the 4R70W we’ll need a new driveshaft. We look at the different types of prop shafts. We show how to measure the drive shaft. We show how to make sure you have the proper universal joints.
Patreon: https://www.patreon.com/gasolinemedia www.monstertransmission.com www.usshift.com Jeff Ford Contact: [email protected] www.thedriveshaftshop.com Vertical Divider
|